Adcon A720 Betriebsanweisung PDF herunterladen (Seite 48)

Using terminal commands

SDA

AVAILABLE FOR

A731 A733A732 A733GSM

DESCRIPTION Sets/returns the maximum delay for waiting awake (i.e. out of sleep mode) for a

service request of an SDI-12 sensor. This parameter is set to 30 seconds by

default. A larger value may lead to higher power consumption. This should be used

in cases where an SDI-12 sensor needs large time values to return a sensor result.

If you have such sensors and still want to use them, you need to change this

parameter, but please be aware that the RTU’s power consumption will be higher.

PARAMETERS Maximum wake time in seconds (1 to 999).

RETURNS The current value (in seconds).

EMARKS SET/GET.

REMOTE No.

XAMPLE SDA

29000 SDA 30 0

SDA 50

29000 SDA 0

FPC

AVAILABLE FOR

A731 A733A732 A733GSM

DESCRIPTION: This command allows the use of sensors that generate pulses with frequencies

between 0.5Hz and 30Hz.

PARAMETERS: 0: let processor enter power save mode and thus not catch "fast" pulses.

1: enable RTU to count "fast" pulses.

NONE: display current setting.

RETURNS: The current setting, or the command’s success or error code.

REMARKS: GET/SET, starting from RTU firmware version 2.2.0.

REMOTE: No.

EXAMPLE: FPC

193 FPC 0 0

FPC 1

193 FPC 0

FPC

193 FPC 1 0

GSMPIN

AVAILABLE FOR

A731 A733A732 A733GSM

DESCRIPTION Allows entering the PIN code for activating the SIM card.

ARAMETERS The PIN code.

ETURNS Result: success or error (error if the wrong PIN code was entered).

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 63 64

Keine Kommentare

Adcon A720 Betriebsanweisung Seite 48