Adcon A720 Betriebsanweisung PDF herunterladen (Seite 20)

CHAPTER 2

System Setup

Network active : no

IP-address : 192.168.1.2

Netmask : 255.255.255.0

Gateway : 192.168.1.1

Hostname.Domain : a840

Nameserver IP(s) : 192.168.1.2

Timeservername or IP:

Name/IP-Address from outside a NATing router : none

Port number of web-server from outside a NATing router

: none

DHCP server running : no

(C)hange/(S)ave/(D)hcp/(Q)uit configuration? [c/s/d/Q]

6. The above configuration shows that the network is not

enabled. How you enable the network depends on the setup

of your LAN:

• If each computer on the LAN has a fixed address (it can

be assigned by a system administrator or a DHCP server),

get the IP information from your network administrator.

Then type c and change the parameters as follows,

substituting your own information (press Enter at the end

of each line to display the next line):

Activate Network [no]:

IP-address [192.168.1.2]:

221.38.15.75

Netmask [192.168.1.0/24]:

255.255.255.0

Gateway [192.168.1.1]:

221.38.15.1

Hostname.Domain [a840]:

my840.example.com

Nameserver(s) (or none)[192.168.1.2]:

221.38.15.62

Timeserver (or none) [none]:

After you press Enter for the Timeserver parameter, the

new configuration is displayed:

Network Configuration

Network active : yes

IP-address : 221.38.15.75

Netmask : 221.38.15.0/24

Gateway : 221.38.15.1

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 145 146

Keine Kommentare

Adcon A720 Betriebsanweisung Seite 20