Adcon A720 Betriebsanweisung PDF herunterladen (Seite 42)

CHAPTER 2

System Setup

changes, you must confirm them by clicking Update or selecting

File

Update.

Note: If you change the code of an RTU that is also used as a

router for other RTUs, the changes will automatically be

performed for all the routes affected.

Deleting an RTU

If you decide to remove an RTU from your telemetry network, all

you have to do is select the RTU in the Configurator window and

click Remove in the RTUs section. You will be prompted to confirm

the deletion; if you choose Yes, the device will be removed

permanently from the network. To confirm the change, click

Update or select File

Update.

Connecting Sensors

If you connect (or attach) sensors in the field to one or more RTUs,

you need to inform your gateway about the type of sensors and

the connectors where they are attached.

1. In the Configurator window, expand the RTU tree so that you

can see the connector you want to attach a sensor to (you can

make multiple selections by using <ctrl> click if several

connectors use the same type of sensor).

Note: You can also select multiple RTUs (in addition to connectors)

for bulk connecting similar sensors.

Figure 16. Connecting Sensors

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 145 146

Keine Kommentare

Adcon A720 Betriebsanweisung Seite 42