Adcon A720 Betriebsanweisung PDF herunterladen (Seite 22)

CHAPTER 2

System Setup

Nameserver IP(s) : 192.168.1.2

Timeservername or IP:

Name/IP-Address from outside a NATing router : none

Port number of web-server from outside a NATing router

: none

DHCP server running : no (will be started)

Unsaved changes pending!

(C)hange/(S)ave/(D)hcp/(Q)uit configuration? [c/s/d/Q]

Now type s to update the gateway with the displayed

parameter information. You might need to configure your

PC’s network parameters, but you will have to refer to

your PC user guide to do so.

• If the gateway is installed behind a network address

translation (NAT/PAT) router and you want to access the

gateway from the Internet, type the address and/or the

port the gateway should exhibit outside the router . This

is the hostname and/or IP address given by your Internet

provider. You need a fixed address to be able to use the

NAT feature.

You must also remember to configure your NAT router to route

port 80 (or whatever port you entered) to the A840 gateway. The

gateway will try to figure out if the requests come from the internal

network or the Internet and will answer correspondingly.

Note: It is important that your gateway is connected to a network

or another PC via the LAN connection before booting it,

otherwise the networking hardware will be disabled. Reboot

the gateway after attaching it to the network, if necessary, by

typing the command reboot.

Configuring the Gateway Using the Configurator

You can use the A840 Gateway’s built-in graphical tool to configure

its functionality. Follow these steps to properly configure your

gateway:

1. Configure the TCP/IP parameters.

2. Set the date/time and the time zone.

3. Change the default passwords.

4. Enter a license number.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 145 146

Keine Kommentare

Adcon A720 Betriebsanweisung Seite 22