Adcon A720 Betriebsanweisung PDF herunterladen (Seite 33)

CHAPTER 2

Installation

exported from addVANTAGE 3.4x. After navigating to the

required directory, select the file config.xml and click OK.

Figure 11. The Configurator GUI

9. Your network configuration, including the sensors and the

custom sensors you previously had in addVANTAGE 3.4x and

in the addVANTAGE Manager, are now uploaded to your

gateway. You can quit the Configurator or proceed to further

configuration as described in “Administering your Telemetry

Network” on page 35.

Note: If the graphic tree is not changed to reflect the new

configuration after the import operation, then probably you

have exhausted the maximum number of active RTUs

allowed. For more details see also “Entering the license

number” on page 31.

After the above steps are completed, your gateway is ready for

normal operation. If the A440 Wireless Modem is connected as

described in “Installing the Outdoor Unit” on page 16, data from

the RTUs in the field will continue to be retrieved and stored into

the gateway’s internal memory. In addition to the frames required

for addVANTAGE 3.4x, new sensor data will also be stored in the

format required by the addVANTAGE 4 Pro software.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 145 146

Keine Kommentare

Adcon A720 Betriebsanweisung Seite 33